Convert Old DTH into a Powerful Stereo Audio Amplifier Using an Old Mobile Charger
Do you have an old DTH (Direct-To-Home) set-top box lying around, collecting dust? Don’t throw it away! That little box can be transformed into a powerful stereo audio amplifier with just a few modifications — and the best part is, you can power it using an old mobile charger. This DIY hack not only saves money but also helps reduce e-waste.
Why Use an Old DTH Box?
Old DTH boxes have strong metal/plastic enclosures, decent circuitry space, and enough input/output ports for audio connections. By reusing them, you get:
-
A compact and sturdy amplifier body
-
Built-in buttons and ports for easy wiring
-
A unique look for your DIY speaker project
-
The satisfaction of upcycling old electronics
Materials You’ll Need
-
Old DTH box (any brand, non-working or unused)
-
5V–12V stereo amplifier board (depends on your speaker size)
-
Old mobile charger (5V, 1A or higher)
-
Pair of speakers (4–8 ohms)
-
Screwdriver set
-
Soldering iron & solder
-
Jumper wires
-
Double-sided tape or screws
Step-by-Step Conversion
1. Open the DTH Box
Unscrew and remove the DTH casing. Take out the old circuit board if it’s not needed. Keep only the enclosure and any useful connectors.
2. Mount the Amplifier Board
Place your stereo amplifier board inside the DTH casing. Secure it with screws or double-sided tape.
3. Connect the Speakers
Attach the speaker wires to the amplifier board’s left and right channels. You can use external speaker boxes or fit small speakers inside if the space allows.
4. Power with Old Mobile Charger
Connect your old mobile charger’s 5V output to the amplifier board’s power input. If your amplifier needs more than 5V, use a charger with the required voltage.
5. Add Input Options
Many amplifier boards have AUX, USB, or Bluetooth features. Mount the input ports where the DTH’s existing ports are, so it looks neat and professional.
6. Test Your Setup
Before closing the casing, plug in the mobile charger and play music from your phone or USB. Adjust volume and check sound quality.
7. Close and Enjoy
Once everything works perfectly, close the casing and enjoy your custom-built stereo audio amplifier!
Features You Can Add
✅ Bluetooth – Stream wirelessly from your phone
✅ USB Music Playback – Play directly from a pen drive
✅ FM Radio – Turn it into a music and news hub
✅ Volume & Bass Controls – For richer sound
Tips for Best Results
-
Use a quality amplifier board for clear, distortion-free sound
-
Choose speakers that match the amplifier’s wattage output
-
Keep ventilation holes for heat dissipation
-
Label the ports for easy use
Final Words
With this simple hack, you can upcycle your old DTH box into a powerful, feature-packed stereo amplifier — all powered by an old mobile charger. It’s an easy, budget-friendly way to enjoy great sound while reducing electronic waste.
So, instead of tossing that old DTH in the trash, give it a new life as your next DIY audio project!
0 Comments: